Automatic parts washing with solvent, ATEX certified.

Designed for automatic washing of parts.

Models 174C and 722

The washers are pneumatically powered and only require connection to a compressed air supply. An air extraction system is provided to protect the operator from vapours.

The 174C and 722 have a wash tank with inner removable parts basket. The units are controlled by a timer and can be used with solvent or water based detergents. Spray jets direct cleaner solution on to the parts to be washed.

Safety interlocks stop the pumps if the washing cabinet door is opened during use.

The 722 and 174C models share the same features, but the 722 model has a larger wash tank.

  • Ideal for washing with thinner, solvent or water-base
  • Can be used with the water tool
  • For small mechanical parts
  • Automatic wash with fixed nozzles by a membrane pump
  • Automatic vapour exhaust
  • Removable basket
  • ATEX II 2G
  • 722 model has a larger wash tank

Model 720C

The 720 C has a set of fixed spray jets that direct wash solution on to the product inside the wash chamber. The wash is controlled by a timer and can be used with solvent or water based detergents. In addition, the model 720C has a manual wash facility with a solvent fed brush that can be used for a final wash with clean detergent.

Safety interlocks stop the pumps if the washing cabinet door is opened during use.

  • Ideal for washing with thinner, solvent or water-base
  • Can be used with the water tool
  • For mechanical parts, buffers and silk-screen printing frames
  • Wash with brush fed by pump
  • Automatic vapour exhaust
  • Can select clean liquid for rinse
  • ATEX II 2G
Other models
How to purchase
ModelWash cycleDimensions
(mm)
Work bench dimensions
(mm)
Daimeter of
exhaust duct
(mm)
OperationAir pressure
(bar)
ProtectionWeight
(kgs)
174CAutomatic530 x 710 x 1260 h470 x 750 x 350 h120Pneumatic6 - 10ATEX II 3 GD58
722Automatic720 x 880 x 1260 h660 x 670 x 300 h150Pneumatic6 - 10ATEX II 2 G85
720CAutomatic + Manual910 x 657 x 1670 h880 x 675 x 600 h180Pneumatic6 - 10ATEX II 2 G81
View other models
Icon

Parts Washers Catalogue 2.20 MB 57 downloads

...
View all downloads

Options

  • Also available the 720B with manual spray wash

More options available on request.

Contact us
ATEX certified
ATEX certified

All models are ATEX II 2G approved and are suitable for use in flammable areas.

Installation
Easy to install

Connect to compressed air supply, earth unit and connect exhaust ducting (1 metre supplied with machine).

Installation by a Solutex Engineer is available on request at extra cost.

How to purchase

Please contact us for prices and to discuss your needs.

If you require prices, product information or have any questions about our equipment, do not hesitate to contact us using one of the methods below.

Call us on 01691 622225 (lines open Monday – Friday: 9am – 5pm)

If you are calling from outside of the UK, please call +44 1691 622225.

Complete the form below:

Please tick below to consent to your data being stored in line with the guidelines set out in our privacy policy.

I confirm my consent:

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Our team are available to contact via our live chat portal throughout the course of the day.

If we are offline please send us a message and we’ll get back in touch.

Start a chat
If you prefer to send an email, then contact us using the address below:
info@solutex.co.uk