Advanced high quality solvent and water based paint gun washers for perfect results every time.

Manual washer with vapour extraction – ATEX certified II 2G.

Dual Manual Paint gun washer for water and solvent

The pneumatic Spray Gun Washer L20 M is provided with two different work stations. This simple and inexpensive appliance has been designed for manually washing spray guns and small painted objects with both water and solvent.

Fumes are automatically exhausted each time the operator opens the upper door. It is also ideal for colour tests with water and solvent.

Manual washing with water and detergent: this work area is fitted with a brush fed with recirculating liquid. A nebulizer provides clean water for a final rinse.

Manual washing with solvent: this work area is provided with a venturi pump supplies recirculating thinner for pre-washing. A nebulizer provides clean thinner for final rinsing.

Finally, the blowing gun is used to dry the guns and the washed parts.

The water treatment kit consists of two tanks, a pre-filter and a main filter. A flocculent powder is added to the water and an air mixer in the unit creates flocks. These are released through the filter system separating the paint from water to allow its reuse.

Other models
How to purchase

Our washing machines provide a complete work station for washing paint spray guns. Wash guns, tools and empty paint cans, you can also do colour tests with air hose provided and store pieces.

The work surface provides adequate room to perform various jobs easily and safely with air extraction. The units are simple to install and are provided with complete instructions. If you prefer, we can install and instruct operators on use and maintenance.

Dual spray gun washers - Model L20M


  • Combi unit for manual wash of waterborne and solvent based paint
  • Automatic vapour exhaust from work area
  • Water zone
    • Pre-wash with brush and pump fed recirculating liquid
    • Nebulizer for final rinse with clean water
    • Air gun for final drying
    • Water/paint separation kit included
  • Solvent zone
    • Pre-wash with Venturi pump fed recirculating thinner
    • Venturi pump feeding clean thinner
    • Nebulizer for final rinse with clean thinner
  • Colour tests allowed
  • 100% Stainless steel
  • ATEX II 2G
  • 2 year warranty
  • FREE supplied with 5 litres of Remover detergent, 2 kgs Flock, 5 pre-filters and 1 main filter
  • Optional Kit M (for thinner)
  • Optional Kit F (for water)

More options available on request.

Contact us
ModelWash processNo. of guns that can be cleaned at the same timeOperationAir pressure
Extract duct
L20MManualN/APneumatic6-10150990 x 690 x 149085
View other models

Dual Spray Gun Washers 737.05 KB 336 downloads

View all downloads
ATEX certified

Approved for use in potentially flammable areas.

Finance options
Buy or Lease

Finance options are available on request. Learn more by visiting our finance page. Note, finance is only available to UK customers.

Finance options

How to purchase

Please contact us for prices and to discuss your needs.

If you require prices, product information or have any questions about our equipment, do not hesitate to contact us using one of the methods below.

Call us on 01691 622225 (lines open Monday – Friday: 9am – 5pm)

If you are calling from outside of the UK, please call +44 1691 622225.

Complete the form below:
Please tick above to consent to your data being stored in line with the guidelines set out in our Privacy Policy

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Our team are available to contact via our live chat portal throughout the course of the day.

If we are offline please send us a message and we’ll get back in touch.

Start a chat
If you prefer to send an email, then contact us using the address below: