Advanced high quality solvent and water based paint gun washers for perfect results every time.

Manual wash with water, auto wash with solvent.

Dual Spray Gun Washer for solvent and water -Model G40

The pneumatically operated G40 M is entirely made of stainless steel and provided with a vapour extraction. The system is the combination of 2 spray gun washers in one.

The washers work in tandem and are used to wash guns stained with water based and solvent based paint. Colour tests can also be performed.

Manual washing with water and detergent: pre-wash with brush fed with recirculating liquid, nebulizer for final rinse with clean water and dry using blow gun.

Automatic washing with solvent: the diaphragm pump controlled by the timer feeding the washing machine is fitted with a set of nozzles for the pre-wash, a nebulizer provides final rinsing with clean thinner.

The water treatment kit consists of two tanks, a pre-filter and a main filter. A flocculent powder is added to the water and an air mixer in the unit creates flocks. These are released through the filter system separating the paint from water to allow its reuse.

Other models
How to purchase

Our washing machines provide a complete work station for washing paint spray guns. Wash guns, tools and empty paint cans, you can also do colour tests with air hose provided.

The work surface provides adequate room to perform various jobs easily and safely with air extraction. The units are simple to install and are provided with complete instructions. If you prefer, we can install and instruct operators on use and maintenance.

Dual Washer Model G40M for solvent and water - internal view


  • Combi unit, automatic and manual wash of waterborne and solvent based paint
  • Automatic vapour exhaust from work area
  • Water zone
    • Pre-wash with brush and pump fed recirculating liquid
    • Nebulizer for final rinse with clean water
    • Air gun for final drying
    • Water/paint separation kit included
  • Solvent zone
    • Automatic wash with diaphragm pump feeding recirculating thinner
    • Mechanical block on lid during automatic washing cycle
    • Venturi pump feeding clean thinner
    • Nebulizer for final rinse with clean thinner
  • Air pressure regulator for colour testing. Colour tests allowed
  • 100% Stainless steel
  • ATEX II 2G
  • 2 year warranty
  • FREE supplied with 5 litres of Remover detergent, 2 kgs Flock, 5 pre-filters and 1 main filter
  • Optional Kit M (for thinner)
  • Optional Kit F (for water)

More options available on request.

Contact us
ModelWash processNo. of guns that can be cleaned at the same timeOperationAir pressure
Extract duct
G40 MAutomatic solvent/Manual water2Pneumatic6-101501190 x 690 x 1490107
View other models

Dual Spray Gun Washers 737.05 KB 336 downloads

View all downloads
ATEX certified

Approved for use in potentially flammable areas.

Finance options
Buy or Lease

Finance options are available on request. Learn more by visiting our finance page. Note, finance is only available to UK customers.

Finance options

How to purchase

Please contact us for prices and to discuss your needs.

If you require prices, product information or have any questions about our equipment, do not hesitate to contact us using one of the methods below.

Call us on 01691 622225 (lines open Monday – Friday: 9am – 5pm)

If you are calling from outside of the UK, please call +44 1691 622225.

Complete the form below:
Please tick above to consent to your data being stored in line with the guidelines set out in our Privacy Policy

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Our team are available to contact via our live chat portal throughout the course of the day.

If we are offline please send us a message and we’ll get back in touch.

Start a chat
If you prefer to send an email, then contact us using the address below: