+44 (0)1691 622225

Selected chemicals for use with our parts washing machines

Solvent or water based detergents give great cleaning results every time

Eskaphor N6857: A neutral water based cleaner with good cleaning power and corrosion protection properties for cast iron and steel surfaces. Can be used for cleaning steel, iron, stainless steel, aluminium and its alloys, galvanised material and plastic parts.

Features:

Free of EDTA and NTA
High separation performance of oil and grease which extends life of the cleaning solution
Not classified as toxic, corrosive, or carcinogenic

Product

Application

Mix ratio with water

pH of work solution

Flashpoint

Ozone depleting

Risk phrases

Safety phrases

Pack sizes

Technical Data sheets

N6857

Water washing

1 to 3%

9.8

Non flammable

R20, 36,37,38

none

20 and 202 litres

TDS-N6857

REMOVER

Water washing

5 to 15%

N/a

Non flammable

R36,38

S2,24,25

4 and 10 litres

TDS-REMOVER

S588

Solvent washing

neat

N/a

>100° C

R65,R66

S23,24,25,29,62

30 and 202 litres

TDS-S588

The chemicals have been specifically chosen to work with our range of parts washers to produce great cleaning results whilst being safe to you with low environmental impact.

Eskapon S588: An odourless solvent cleaner with virtually no smell and high flash point >100°C. Does not contain VOC’s.

Features:

Odourless
Good degreasing power
Harmless to painted surfaces and most plastics
Non explosive

REMOVER water additive for cleaning parts stained with water based inks and paints. Used with warm water it can even remove dried on inks and paints.

it is non flammable.
it creates little foam.
It helps keep pumps, pipelines and the washing nozzles clean.
it limits the formation of dirt on the inside walls of the cleaning machine and reduces maintenance cleaning.