Sitemap        Copyright © 2015 Solutex Ltd          Go to Mobile site               Contact Solutex    Privacy

Receive email updates Models 174C, 722 and 720C Automatic Parts Washers for use with solvents

Automatic parts washing with solvent, ATEX certified.

Designed for automatic washing of parts

The washers are pneumatically powered and only require connection to a compressed air supply. An air extraction system is provided to protect the operator from vapours.

The 174C and 722 have a wash tank with inner removable parts basket. The units are controlled by a timer and can be used with solvent or water based detergents. Spray jets direct cleaner solution on to the parts to be washed.  

Safety interlocks stop the pumps if the washing cabinet door is opened during use.


174C


722

As 174C above but with larger wash tank.





720C

The 720 C has a set of fixed spray jets that direct wash solution on to the product inside the wash chamber. The wash is controlled by a timer and can be used with solvent or water based detergents. In addition, the model 720C has a manual wash facility with a solvent fed brush that can be used for a final wash with clean detergent.


Safety interlocks stop the pumps if the washing cabinet door is opened during use.




Call for Price

Easy to install: connect to compressed air supply, earth unit and connect exhaust ducting (1 metre supplied with machine). Installation by a Solutex Engineer is available on request at extra cost.

Parts Washer 174C Parts Washer 722 Parts Washer 720C

All can

be used

with water too!